Aluano
Aluminium Alloys & Anodizing
ALUMINIUM ALLOYS – OVERVIEW
Properties, Common Alloys, and Suitability for Anodizing
ROLLED & EXTRUDED ALLOYS (WROUGHT ALLOYS)
| EN AW Series | Primary Alloying Elements | Typical Alloys (Examples) | Corrosion Resistance (Relative) | Machinability (Relative) | Weldability (Relative) | Decorative Anodizing (Suitability) | Technical / Hard Anodizing (Suitability) | Typical Applications | Anodizing Notes |
|---|---|---|---|---|---|---|---|---|---|
| 1xxx | ≥ 99 % aluminium | 1050A, 1070A, 1100 | ●●●●●Very high | ●●○○○Low-Medium | ●●●●●Very high | ●●●●●Very Good | ●●●●●Very Good | Chemical industry, reflectors, foil, signage, electrical components | Typically produces a clear/light finish. Highly suitable for decorative anodizing. |
| 2xxx | Kobber (Cu) | 2011, 2014, 2017A, 2024 | ●●○○○Low-Medium | ●●●●●Very Good | ●○○○○Bad | ●●○○○Limited | ●●○○○Medium | Aerospace, high-strength components | High copper content may result in a yellow/bronze tint. More challenging to anodize. |
| 3xxx | Mangan (Mn) | 3003, 3005, 3103 | ●●●●○Høj | ●●○○○Medium | ●●●●○Good | ●●●●○Good | ●●●●○Good | Roofing and facade panels, heat exchangers, containers, transportation | Can be anodized, but may result in a grey/brown tint. Color variations between batches may occur. |
| 4xxx | Silicium (Si) | 4032, 4043 | ●●○○○Medium | ●●○○○Medium | ●●●●○Good | ●●○○○Limited | ●●○○○Limited | Brazing materials, specialized applications | High silicon content may result in a dark/grey finish. Generally not recommended for decorative anodizing. |
| 5xxx | Magnesium (Mg) | 5005, 5052, 5083, 5754 | ●●●●●Very high | ●●●●○Good | ●●●●●Very high | ●●●●●Very Good | ●●●●●Very Good | Marine environments, tanks, shipbuilding, pressure vessels | Generally well suited for anodizing. 5005 is particularly suitable for decorative anodizing. |
| 6xxx (generelt) | Mg + Si | 6xxx | ●●●●●Very high | ●●●●○Good | ●●●●●Very Good | ●●●●●Very Good | ●●●●●Very Good | Construction, building, profiles, transportation, furniture | The most widely used alloy series for anodizing. Good corrosion resistance and a consistent finish. |
| 6060 | Mg-Si | 6060 | ●●●●●Very high | ●●●●○Good | ●●●●●Very Good | ●●●●●Very Good | ●●●●●Very Good | Architectural profiles, window frames, interior applications | Particularly well suited for decorative anodizing. Typically produces a uniform, clear finish. |
| 6061 | Mg-Si-Cu | 6061 | ●●●●●Very high | ●●●●●Very Good | ●●●●●Very Good | ●●●●○Good | ●●●●●Very Good | Machine parts, structural components, transportation, technical components | Anodizes well. Often used for technical and hard anodizing. Decorative finish may vary. |
| 6063 | Mg-Si | 6063 | ●●●●●Very high | ●●●●○Good | ●●●●●Very Good | ●●●●●Very Good | ●●●●●Very Good | Windows, doors, facade profiles, architectural profiles | Highly suitable for decorative anodizing. Typically produces a uniform, clear finish. |
| 6073 | Mg-Si | 6073 | ●●●●●Very high | ●●●●○Good | ●●●●●Very Good | ●●●●●Very Good | ●●●●●Very Good | Structural profiles, architectural design, facades | A variant of 6082 with improved suitability for decorative anodizing. |
| 6062 | Mg-Si-Mn | 6082 | ●●●●●Very high | ●●●●●Very Good | ●●●●●Very Good | ●●●●○Good | ●●●●●Very Good | Structural components, bridges, cranes, machine parts | Anodizes well, but 6060/6063/6073 are recommended when decorative finish is important. |
| 7xxx | Zink (Zn), ofte Mg/Cu | 7020, 7021, 7022, 7075 | ●●○○○Medium | ●●●●●Very Good | ●●○○○Limited* | ●●○○○Medium | ●●●●●Very Good | Aerospace, high-strength structures, sports equipment | Can be anodized, but may result in a grey, blue-grey, or brown tint. Requires careful process control. |
CAST ALUMINIUM ALLOYS (CAST ALLOYS)
| Alloy Type | Primary Alloying Elements | Typical Alloys (Examples) | Corrosion Resistance (Relative) | Machinability (Relative) | Decorative Anodizing (Suitability) | Technical / Hard Anodizing (Suitability) | Typical Applications | Anodizing Notes |
|---|---|---|---|---|---|---|---|---|
| Al-Si (høj Si) | Aluminium-Silicium (~ 7–12 % Si) | Silumin, AlSi7, AlSi12 | ●●○○○Medium | ●●●●○Good | ●●○○○Limited | ●●○○○Medium | Engine housings, pump housings, enclosures, brackets | High silicon content may result in a dark/grey and uneven finish. Silicon does not anodize. |
| Al-Si-Mg (middel Si) | Al-Si-Mg (~ 3–6 % Si, 0,3–0,6 % Mg) | 356, 357, etc. | ●●●●○Good | ●●●●○Good | ●●○○○Medium | ●●●●○Good | Structural castings and machine parts, structural components | Can be anodized, but the finish depends heavily on silicon and iron content, as well as casting quality. |
| Al-Si-Cu | Al-Si-Cu (~ 2–4 % Cu) | 319, 380, etc. | ●●○○○Medium | ●●●●○Good | ●●○○○Limited | ●●○○○Medium | Engine blocks, cylinders, technical components | Both silicon and copper can affect appearance and coating quality. Not suitable for uniform decorative anodizing. |
| Al-Mg (cast) | Aluminium-Magnesium (~ 2–6 % Mg) | e.g. 518, 535, etc. | ●●●●○Good | ●●●●○Good | ●●●●○Good | ●●●●●Very Good | Marine komponenter, pumper, ventiler, beslag | En af de bedste støbte legeringer til anodisering. Kan give ensartet finish ved god materialekvalitet. |
Rating Scale and Notes: Very Good / Very High: 5 green dots · Good / High: 3–4 green dots · Moderate: 2 yellow dots · Limited: 2 orange dots · Poor: 2 red dots · Not Applicable: Grey dots · *: Depends on the specific alloy and temper. · Source: User-provided image: ALUMINIUM ALLOYS – OVERVIEW (ALUANO) · Disclaimer: Properties may vary depending on temper, product form, chemical composition, surface quality, and anodized layer thickness. · Note: The dot indicators are graphical and qualitative; the written ratings are the primary source of information.
Are you interested or have any questions?
Contact us directly using the form below. We look forward to hearing from you!
Quality assurance – anodizing
At Aluano, we never compromise on quality – especially when it comes to anodizing. Our quality
assurance system is built around strict routines, thorough documentation, and continuous monitoring,
allowing us to deliver consistent and reliable results – every time.
Our quality routines include:
- Daily measurements of the tub’s values, such as pH and ppm.
- Weekly in-house laboratory analyses to ensure process stability
- Regular replacement of rinse baths to maintain high cleanliness
- Use of specialized nozzles for recirculation, ensuring fluid coverage throughout the component’s geometry
– including cavities and hard-to-reach areas - Proper rinsing processesto ensure holes and threads are free from acid and chemical residues
- Coating thickness measurements are documented and traceable via measurement reports
- Measurement reports can be included upon request – as documentation of completed measurements and quality control
